|
|
ULTRA HIGH SPEED RANGE |
|||
 |
|||
| Ultra High Speed Spinning with take-up speeds 8000 Mtrs/Min & more of mono & multi filament yarns, requiring higher suction power (higher operating pressures), simultaneous threading up to 12 ends / take-up or more. Does not loose yarn tension even at extreme take-up speeds. BCF, Staple fibres, etc. | |||
| Air Pressure | :
|
6 to 18 bar (kg/cm2) | |
| Air Consumption | :
|
360 Nm3 /hr at 8 bar | |
| Air Connection | :
|
1” Ball Valve. | |
| Inlet Pipe - 25 mm or 3/4" I/D Hose with 1” BSP male threaded end connector. | Outlet (Waste) Pipe - 32 mm O/D. | ||
| OPTIONAL Waste Pipe - 38.1 mm O/D. This increases velocity of air currents within the nozzle resulting in smooth & higher suction performance, as desired in specific applications. | |||
| OPTIONAL Off-set Adopter for Valve, facilitates accommodating larger hose, on enlarged waste pipe as above, for specific applications. |
|||
| Weight | :
|
1.2 -1.35 Kgs, depending on model with protective sleeve on suction pipe. Over all length : Approx. 414 mm |
|
| Model : AEC - 500 U | |||
| Denier Range peed | :
|
2,000 Dtex Total. | |
| Yarn Speed | :
|
8,000 Mtrs / Min. | |
| Suction Pipe | :
|
5 mm I/D. | |
| Model : AEC - 750 U | |||
| Denier Range | :
|
4,000 Dtex Total. | |
| Yarn Speed | :
|
8,000 Mtrs / Min. | |
| Suction Pipe | :
|
7 mm I/D. | |
| Model : AEC - 1000 U | |||
| Denier Range | :
|
12,000 Dtex Total. | |
| Yarn Speed | :
|
6,500 Mtrs / Min. | |
| Suction Pipe | :
|
10 mm I/D. | |
| Model : AEC - 1250 U | |||
| Denier Range | :
|
15,000 Dtex Total. | |
| Yarn Speed | :
|
6,000 Mtrs / Min. | |
| Suction Pipe | :
|
12 mm I/D. | |
|